Wiko Tommy Flashing Tutorial with SP Flash Tool

Home » Flashing Guides » Wiko Tommy Flashing Tutorial with SP Flash Tool
Wiko Tommy Flashing Tutorial with SP Flash Tool

If you are trying to flash your Wiko Tommy device then I would like to suggest you to try using Smartphone flash tool (aka SP Flash Tool). SP flash tool is great flashing tool for Android. You can use this tool to flash almost any MTK (Mediatak IC) based smartphone. Try flashing any custom ROMs, stock ROMs on your Wiko Tommy Android smartphone.

SP flash tool is best firmware flashing tool available online whether it is custom ROM or stock ROM. Using SP Flash Tool, you can flash Wiko Tommy Android device (but make sure to check if it is based on Mediatek IC). Flash any custom or stock ROM over Wiko Tommy Android device. Also, do make sure that you have installed Wiko Tommy USB drivers properly on your PC before flashing any firmware file.

Find your Wiko Tommy USB drivers by using search below:

Generic selectors
Exact matches only
Search in title
Search in content
Search in posts
Search in pages

Pre-requisites before flashing Wiko Tommy:

  • Battery should be charged up to 70%
  • Make sure you have Wiko Tommy's USB cord available
  • Download and install SP Flash tool in PC
  • Since, SP flash tool we need to install MediaTek USB drivers
  • Download Wiko Tommy firmware file (Scatter file + files to be flashed)
  • Last but not the least, you need to take your device backup (for safety reasons)
  • Once you have all the things ready above, follow the rest of flashing tutorial

Steps to flashing Wiko Tommy using SP flash tool

Follow the steps below to flash Wiko Tommy with SP flash tool:

  • Install SP FLASH TOOL in PC - Step 1
    1
    Download & install spflashtool.exe:

    Download SP flash tool, spflashtool.exe

  • Download flash recovery image Step 2
    2
    Download flash recovery image:

    FLashing is not easy, it take time and patience. To flash Wiko Tommy, make sure you have flash recovery image ready for your device model.

  • Wiko Tommy flashing tutorial with SP Flash Tool - Step 3
    3
    Load scatter file:

    Click Scatter Loading (Load Scatter file of Wiko Tommy).

  • 4
    Uncheck all boxes :

    Now, you should uncheck all boxes from SP flash tool

  • 5
    Load Recovery Image:

    Tick-box, Go to / click RECOVERY box from list and load recovery image of your Wiko Tommy device (load image from the separate window -->open)

  • 6
    Recovery box must be CHECKED:

    Recovery box is checked before you connect your Wiko Tommy, in recovery image location (uncheck all other boxes)

  • 7
    Turn off and connect Wiko Tommy with PC:

    Turn off Wiko Tommy and connect it with PC

  • 8
    Click Download button:

    After connecting your device with PC, just click download button on top

  • 9
    Step #9, click yes:

    If it ask click “yes”

  • 10
    Conguratulations:

    Congrats! You have successfully flashed your Wiko Tommy device

Disclaimer: Please follow the flashing tutorials on your own risk.

Conclusion

If SP flash tool prompts green circle, you are done. Wiko Tommy have been flashed using SP flash tool.

Leave a Reply

Your email address will not be published. Required fields are marked *