Verykool s700 Flashing Guide with SP Flash Tool

Home » Flashing Guides » Verykool s700 Flashing Guide with SP Flash Tool
Verykool s700 Flashing Guide with SP Flash Tool

If you are trying to flash your Verykool s700 device then I would like to suggest you to try using Smartphone flash tool (aka SP Flash Tool). SP flash tool is great flashing tool for Android. You can use this tool to flash almost any MTK (Mediatak IC) based smartphone. Try flashing any custom ROMs, stock ROMs on your Verykool s700 Android smartphone.

SP flash tool is best firmware flashing tool available online whether it is custom ROM or stock ROM. Using SP Flash Tool, you can flash Verykool s700 Android device (but make sure to check if it is based on Mediatek IC). Flash any custom or stock ROM over Verykool s700 Android device. Also, do make sure that you have installed Verykool s700 USB drivers properly on your PC before flashing any firmware file.

Find your Verykool s700 USB drivers by using search below:

Generic selectors
Exact matches only
Search in title
Search in content
Search in posts
Search in pages

Pre-requisites before flashing Verykool s700:

  • Battery should be charged up to 70%
  • Make sure you have Verykool s700's USB cord available
  • Download and install SP Flash tool in PC
  • Since, SP flash tool we need to install MediaTek USB drivers
  • Download Verykool s700 firmware file (Scatter file + files to be flashed)
  • Last but not the least, you need to take your device backup (for safety reasons)
  • Once you have all the things ready above, follow the rest of flashing tutorial

Steps to flashing Verykool s700 using SP flash tool

Follow the steps below to flash Verykool s700 with SP flash tool:

  • Install SP FLASH TOOL in PC - Step 1
    Download & install spflashtool.exe:

    Download SP flash tool, spflashtool.exe

  • Download flash recovery image Step 2
    Download flash recovery image:

    FLashing is not easy, it take time and patience. To flash Verykool s700, make sure you have flash recovery image ready for your device model.

  • Verykool s700 flashing tutorial with SP Flash Tool - Step 3
    Load scatter file:

    Click Scatter Loading (Load Scatter file of Verykool s700).

  • 4
    Uncheck all boxes :

    Now, you should uncheck all boxes from SP flash tool

  • 5
    Load Recovery Image:

    Tick-box, Go to / click RECOVERY box from list and load recovery image of your Verykool s700 device (load image from the separate window -->open)

  • 6
    Recovery box must be CHECKED:

    Recovery box is checked before you connect your Verykool s700, in recovery image location (uncheck all other boxes)

  • 7
    Turn off and connect Verykool s700 with PC:

    Turn off Verykool s700 and connect it with PC

  • 8
    Click Download button:

    After connecting your device with PC, just click download button on top

  • 9
    Step #9, click yes:

    If it ask click “yes”

  • 10

    Congrats! You have successfully flashed your Verykool s700 device

Disclaimer: Please follow the flashing tutorials on your own risk.


If SP flash tool prompts green circle, you are done. Verykool s700 have been flashed using SP flash tool.

Leave a Reply

Your email address will not be published. Required fields are marked *