Motorola Xoom CDMA Flashing Guide with RSD Flash Tool

Home » Flashing Guides » Motorola Xoom CDMA Flashing Guide with RSD Flash Tool
Motorola Xoom CDMA
Motorola Xoom CDMA Flashing Guide with RSD Flash Tool

In this article, you will learn to use RSDLite flash tool to unbrick any Motorola device and flashing stock firmware on your Motorola Xoom CDMA. RSDLite is one of the reliable flashing tool which is being used by mobile repair personals out there, and if you are facing issues with your Motorola Xoom CDMA then you should try flashing stock ROM on it with RSDLite flash tool.

Is my Motorola Xoom CDMA bricked?

RSDLite flashing tool will help you to flash Motorola Xoom CDMA official stock ROMs, custom ROMs on your Motorola devices running on Android operating system. If by chance you are experiencing some issues with your Motorola Xoom CDMA like the device not being able to boot up, or isn’t been able to access the recovery mode or download mode on your Motorola Xoom CDMA device, you might got your device in hard bricked mode.

How to fix bricked Motorola Xoom CDMA devcie

If your Motorola Xoom CDMA device is bricked, then bitter part is that you can’t do anything about it for example, factory reset, no access to download mode or recovery/fastboot mode. Last thing to fix bricked Motorola Xoom CDMA devcie is flashing blankflash partition file over your Android Motorola device.

How to Unbrick Motorola Xoom CDMA with Blankflash

To fix Motorola Xoom CDMA with Blankflash you need the following pre-requisites to follow:

  • All Qualcomm chipset based Moto devices will have Qualcomm mode (just like download mode, recovery mode) if it turns into hard bricked, accessible through 'Qualcomm download mode'
  • First thing's first, make sure to install Qualcomm drivers on your PC
  • Connect your Motorola Xoom CDMA device's with PC after installing proper USB drivers (to see if your device is connected, try looking under Device Manager)
  • Now, do this → Hold volume down and power buttons till you see in connect under ports.
  • connection smartphone with device
    Windows Device Manager shows Quacomm Driver working in connected state
  • Download blankflash.zip for Motorola Xoom CDMA device online
  • From the blankflash.zip file you will find 'blank-flash.bat' file
  • Motorola Xoom CDMA device should be able to boot into fastboot now
  • Motorola Xoom CDMA is ready to be flashed via RSDLite Flash Tool with your stock firmware (stock ROM) or any custom ROM i.e., CyanogenMod ROM or LineageOS ROM

How to soft bricked Motorola Xoom CDMA devcie

If you think that your Motorola Xoom CDMA devcie is soft bricked then you should follow how to flash stock ROM on Motorola Xoom CDMA devcie as soon as possible. Signs that your Motorola Xoom CDMA devcie is might be soft bricked are as follows:

  • Motorola Xoom CDMA device can said to be in soft bricked state when it is stuck in boot loop, animation screen, touch-screen hangs, or not start up at all
  • But on the other hand, you can perfectly access your Motorola Xoom CDMA device's recovery mode, fastboot mode and download mode
  • Yes, Motorola Xoom CDMA is soft brikced if any of he above symtoms do exists
  • But, nothing is to be worried about, you can recover your Motorola Xoom CDMA device if it is soft bricked
  • Your Motorola Xoom CDMA device just needs its official stock ROM to be flashed with RSDLite flash tool

Pre-requisites to before flashing Motorola Xoom CDMA:

  • Please check, your battery must be charged up to 70% before flashing it
  • Take your device's data backup, in case of any flashing error
  • Download RSDLite flash tool for flashing stock ROM on Motorola Xoom CDMA
  • Please install Qualcomm drivers if you haven't already to fix USB driver errors (Also official Android ADB USB Driver)
  • Lastly, download your Motorola Xoom CDMA stock ROM firmware file (Scatter file + files to be flashed) with RSDLite flash tool

How to flash official firmware on Motorola Xoom CDMA with RSDLite Flash Tool

You will be able to flash your Motorola Xoom CDMA with RSDLite flash tool from the step by step tutorial below:

  • Download Motorola Xoom CDMA stock ROM firmware file
  • From the pre-requisites section above, install RSDLite Tool on your PC
  • RSDLite Setup Wizard / Installation proces of RSDlite in Windows 10
    RSDLite Setup Wizard / Installation proces of RSDlite in Windows 10
  • Let's begin
  • Power off your Motorola Xoom CDMA device using power button (then choose power off)
  • Reboot Motorola Xoom CDMA it into Android's fastboot mode (Press Power + Volume down buttons at the same time)
  • fastboot flash mode screen on Moto G4
    how to enter fastboot flash mode in Motorola devices
  • It's time to connect your Motorola Xoom CDMA device with your PC using USB cord
  • Run RSDLite flash tool in PC
  • Now, click on the 3-dotted button from software interface to select Motorola Xoom CDMA Android Stock Firmware OS file
  • 3-dotted button from RSDLite software interface
    3-dotted button from RSDLite software interface
  • Please choose the correct stock ROM firmware file
  • Choose the right flashing file RSDLite
  • It will take some time after you click on "start button”.
  • Be patient please, Motorola Xoom CDMA while stock Rom is being flashed / installed
  • Once completed, unplug the Motorola Xoom CDMA device from USB cord and reboot it

Congrats, your Motorola Xoom CDMA device is now updated with official stock ROM firmware file and you have fixed soft brick issue completely. If you have any problem while following up on how to flash Motorola Xoom CDMA with RSDLite flash tool step by step tutorial, please comment we would love to help.

If you are trying to flash your Motorola Xoom CDMA device then I would like to suggest you to try using Smartphone flash tool (aka SP Flash Tool). SP flash tool is great flashing tool for Android. You can use this tool to flash almost any MTK (Mediatak IC) based smartphone. Try flashing any custom ROMs, stock ROMs on your Motorola Xoom CDMA Android smartphone.

SP flash tool is best firmware flashing tool available online whether it is custom ROM or stock ROM. Using SP Flash Tool, you can flash Motorola Xoom CDMA Android device (but make sure to check if it is based on Mediatek IC). Flash any custom or stock ROM over Motorola Xoom CDMA Android device. Also, do make sure that you have installed Motorola Xoom CDMA USB drivers properly on your PC before flashing any firmware file.

Find your Motorola Xoom CDMA USB drivers by using search below:

Generic selectors
Exact matches only
Search in title
Search in content
Search in posts
Search in pages

Pre-requisites before flashing Motorola Xoom CDMA:

  • Battery should be charged up to 70%
  • Make sure you have Motorola Xoom CDMA's USB cord available
  • Download and install SP Flash tool in PC
  • Since, SP flash tool we need to install MediaTek USB drivers
  • Download Motorola Xoom CDMA firmware file (Scatter file + files to be flashed)
  • Last but not the least, you need to take your device backup (for safety reasons)
  • Once you have all the things ready above, follow the rest of flashing tutorial

Steps to flashing Motorola Xoom CDMA using SP flash tool

Follow the steps below to flash Motorola Xoom CDMA with SP flash tool:

  • Install SP FLASH TOOL in PC - Step 1
    1
    Download & install spflashtool.exe:

    Download SP flash tool, spflashtool.exe

  • Download flash recovery image Step 2
    2
    Download flash recovery image:

    FLashing is not easy, it take time and patience. To flash Motorola Xoom CDMA, make sure you have flash recovery image ready for your device model.

  • Motorola Xoom CDMA flashing tutorial with SP Flash Tool - Step 3
    3
    Load scatter file:

    Click Scatter Loading (Load Scatter file of Motorola Xoom CDMA).

  • 4
    Uncheck all boxes :

    Now, you should uncheck all boxes from SP flash tool

  • 5
    Load Recovery Image:

    Tick-box, Go to / click RECOVERY box from list and load recovery image of your Motorola Xoom CDMA device (load image from the separate window -->open)

  • 6
    Recovery box must be CHECKED:

    Recovery box is checked before you connect your Motorola Xoom CDMA, in recovery image location (uncheck all other boxes)

  • 7
    Turn off and connect Motorola Xoom CDMA with PC:

    Turn off Motorola Xoom CDMA and connect it with PC

  • 8
    Click Download button:

    After connecting your device with PC, just click download button on top

  • 9
    Step #9, click yes:

    If it ask click “yes”

  • 10
    Conguratulations:

    Congrats! You have successfully flashed your Motorola Xoom CDMA device

Disclaimer: Please follow the flashing tutorials on your own risk.

Conclusion

If SP flash tool prompts green circle, you are done. Motorola Xoom CDMA have been flashed using SP flash tool.

Leave a Reply

Your email address will not be published. Required fields are marked *