
In this article, you will learn to use RSDLite flash tool to unbrick any Motorola device and flashing stock firmware on your Motorola ME632. RSDLite is one of the reliable flashing tool which is being used by mobile repair personals out there, and if you are facing issues with your Motorola ME632 then you should try flashing stock ROM on it with RSDLite flash tool.
Is my Motorola ME632 bricked?
RSDLite flashing tool will help you to flash Motorola ME632 official stock ROMs, custom ROMs on your Motorola devices running on Android operating system. If by chance you are experiencing some issues with your Motorola ME632 like the device not being able to boot up, or isn’t been able to access the recovery mode or download mode on your Motorola ME632 device, you might got your device in hard bricked mode.
- Motorola P40 USB Driver Download Official USB drivers
- Motorola Moto G7 USB Driver Download Official USB drivers
- Motorola P30 Play USB Driver Download Official USB drivers
How to fix bricked Motorola ME632 devcie
If your Motorola ME632 device is bricked, then bitter part is that you can’t do anything about it for example, factory reset, no access to download mode or recovery/fastboot mode. Last thing to fix bricked Motorola ME632 devcie is flashing blankflash partition file over your Android Motorola device.
How to Unbrick Motorola ME632 with Blankflash
To fix Motorola ME632 with Blankflash you need the following pre-requisites to follow:
- All Qualcomm chipset based Moto devices will have Qualcomm mode (just like download mode, recovery mode) if it turns into hard bricked, accessible through 'Qualcomm download mode'
- First thing's first, make sure to install Qualcomm drivers on your PC
- Connect your Motorola ME632 device's with PC after installing proper USB drivers (to see if your device is connected, try looking under Device Manager)
- Now, do this → Hold volume down and power buttons till you see in connect under ports.
- Download blankflash.zip for Motorola ME632 device online
- From the blankflash.zip file you will find 'blank-flash.bat' file
- Motorola ME632 device should be able to boot into fastboot now
- Motorola ME632 is ready to be flashed via RSDLite Flash Tool with your stock firmware (stock ROM) or any custom ROM i.e., CyanogenMod ROM or LineageOS ROM

How to soft bricked Motorola ME632 devcie
If you think that your Motorola ME632 devcie is soft bricked then you should follow how to flash stock ROM on Motorola ME632 devcie as soon as possible. Signs that your Motorola ME632 devcie is might be soft bricked are as follows:
- Motorola ME632 device can said to be in soft bricked state when it is stuck in boot loop, animation screen, touch-screen hangs, or not start up at all
- But on the other hand, you can perfectly access your Motorola ME632 device's recovery mode, fastboot mode and download mode
- Yes, Motorola ME632 is soft brikced if any of he above symtoms do exists
- But, nothing is to be worried about, you can recover your Motorola ME632 device if it is soft bricked
- Your Motorola ME632 device just needs its official stock ROM to be flashed with RSDLite flash tool
Pre-requisites to before flashing Motorola ME632:
- Please check, your battery must be charged up to 70% before flashing it
- Take your device's data backup, in case of any flashing error
- Download RSDLite flash tool for flashing stock ROM on Motorola ME632
- Please install Qualcomm drivers if you haven't already to fix USB driver errors (Also official Android ADB USB Driver)
- Lastly, download your Motorola ME632 stock ROM firmware file (Scatter file + files to be flashed) with RSDLite flash tool
How to flash official firmware on Motorola ME632 with RSDLite Flash Tool
You will be able to flash your Motorola ME632 with RSDLite flash tool from the step by step tutorial below:
- Download Motorola ME632 stock ROM firmware file
- From the pre-requisites section above, install RSDLite Tool on your PC
- Let's begin
- Power off your Motorola ME632 device using power button (then choose power off)
- Reboot Motorola ME632 it into Android's fastboot mode (Press Power + Volume down buttons at the same time)
- It's time to connect your Motorola ME632 device with your PC using USB cord
- Run RSDLite flash tool in PC
- Now, click on the 3-dotted button from software interface to select Motorola ME632 Android Stock Firmware OS file
- Please choose the correct stock ROM firmware file
- It will take some time after you click on "start button”.
- Be patient please, Motorola ME632 while stock Rom is being flashed / installed
- Once completed, unplug the Motorola ME632 device from USB cord and reboot it




Congrats, your Motorola ME632 device is now updated with official stock ROM firmware file and you have fixed soft brick issue completely. If you have any problem while following up on how to flash Motorola ME632 with RSDLite flash tool step by step tutorial, please comment we would love to help.
If you are trying to flash your Motorola ME632 device then I would like to suggest you to try using Smartphone flash tool (aka SP Flash Tool). SP flash tool is great flashing tool for Android. You can use this tool to flash almost any MTK (Mediatak IC) based smartphone. Try flashing any custom ROMs, stock ROMs on your Motorola ME632 Android smartphone.
SP flash tool is best firmware flashing tool available online whether it is custom ROM or stock ROM. Using SP Flash Tool, you can flash Motorola ME632 Android device (but make sure to check if it is based on Mediatek IC). Flash any custom or stock ROM over Motorola ME632 Android device. Also, do make sure that you have installed Motorola ME632 USB drivers properly on your PC before flashing any firmware file.
- Motorola P40 USB Driver Download Official USB drivers
- Motorola Moto G7 USB Driver Download Official USB drivers
- Motorola P30 Play USB Driver Download Official USB drivers
Find your Motorola ME632 USB drivers by using search below:
Pre-requisites before flashing Motorola ME632:
- Battery should be charged up to 70%
- Make sure you have Motorola ME632's USB cord available
- Download and install SP Flash tool in PC
- Since, SP flash tool we need to install MediaTek USB drivers
- Download Motorola ME632 firmware file (Scatter file + files to be flashed)
- Last but not the least, you need to take your device backup (for safety reasons)
- Once you have all the things ready above, follow the rest of flashing tutorial
Steps to flashing Motorola ME632 using SP flash tool
Follow the steps below to flash Motorola ME632 with SP flash tool:
-
1Download & install spflashtool.exe:
Download SP flash tool, spflashtool.exe
-
2Download flash recovery image:
FLashing is not easy, it take time and patience. To flash Motorola ME632, make sure you have flash recovery image ready for your device model.
-
5Load Recovery Image:
Tick-box, Go to / click RECOVERY box from list and load recovery image of your Motorola ME632 device (load image from the separate window -->open)
-
6Recovery box must be CHECKED:
Recovery box is checked before you connect your Motorola ME632, in recovery image location (uncheck all other boxes)
Disclaimer: Please follow the flashing tutorials on your own risk.
Conclusion
If SP flash tool prompts green circle, you are done. Motorola ME632 have been flashed using SP flash tool.