Micromax HS1 Flashing Guide with SP Flash Tool

Home » Flashing Guides » Micromax HS1 Flashing Guide with SP Flash Tool

---

If you are trying to flash your Micromax HS1 device then I would like to suggest you to try using Smartphone flash tool (aka SP Flash Tool). SP flash tool is great flashing tool for Android. You can use this tool to flash almost any MTK (Mediatak IC) based smartphone. Try flashing any custom ROMs, stock ROMs on your Micromax HS1 Android smartphone.

SP flash tool is best firmware flashing tool available online whether it is custom ROM or stock ROM. Using SP Flash Tool, you can flash Micromax HS1 Android device (but make sure to check if it is based on Mediatek IC). Flash any custom or stock ROM over Micromax HS1 Android device. Also, do make sure that you have installed Micromax HS1 USB drivers properly on your PC before flashing any firmware file.

Find your Micromax HS1 USB drivers by using search below:

Pre-requisites before flashing Micromax HS1:

• Battery should be charged up to 70%
• Make sure you have Micromax HS1's USB cord available
• Download and install SP Flash tool in PC
• Since, SP flash tool we need to install MediaTek USB drivers
• Download Micromax HS1 firmware file (Scatter file + files to be flashed)
• Last but not the least, you need to take your device backup (for safety reasons)
• Once you have all the things ready above, follow the rest of flashing tutorial

Steps to flashing Micromax HS1 using SP flash tool

Follow the steps below to flash Micromax HS1 with SP flash tool:

• 
  1
  Download & install spflashtool.exe:

  Download SP flash tool, spflashtool.exe

• 
  2
  Download flash recovery image:

  FLashing is not easy, it take time and patience. To flash Micromax HS1, make sure you have flash recovery image ready for your device model.

• 
  3
  Load scatter file:

  Click Scatter Loading (Load Scatter file of Micromax HS1).

• 4
  Uncheck all boxes :

  Now, you should uncheck all boxes from SP flash tool

• 5
  Load Recovery Image:

  Tick-box, Go to / click RECOVERY box from list and load recovery image of your Micromax HS1 device (load image from the separate window -->open)

• 6
  Recovery box must be CHECKED:

  Recovery box is checked before you connect your Micromax HS1, in recovery image location (uncheck all other boxes)

• 7
  Turn off and connect Micromax HS1 with PC:

  Turn off Micromax HS1 and connect it with PC

• 8
  Click Download button:

  After connecting your device with PC, just click download button on top

• 9
  Step #9, click yes:

  If it ask click “yes”

• 10
  Conguratulations:

  Congrats! You have successfully flashed your Micromax HS1 device

Disclaimer: Please follow the flashing tutorials on your own risk.

Conclusion

If SP flash tool prompts green circle, you are done. Micromax HS1 have been flashed using SP flash tool.