BLU Dash G Flashing Guide with SP Flash Tool

Home » Blu » BLU Dash G Flashing Guide with SP Flash Tool
BLU Dash G Flashing Guide with SP Flash Tool

If you are trying to flash your BLU Dash G device then I would like to suggest you to try using Smartphone flash tool (aka SP Flash Tool). SP flash tool is great flashing tool for Android. You can use this tool to flash almost any MTK (Mediatak IC) based smartphone. Try flashing any custom ROMs, stock ROMs on your BLU Dash G Android smartphone.

SP flash tool is best firmware flashing tool available online whether it is custom ROM or stock ROM. Using SP Flash Tool, you can flash BLU Dash G Android device (but make sure to check if it is based on Mediatek IC). Flash any custom or stock ROM over BLU Dash G Android device. Also, do make sure that you have installed BLU Dash G USB drivers properly on your PC before flashing any firmware file.

Find your BLU Dash G USB drivers by using search below:

Generic selectors
Exact matches only
Search in title
Search in content
Search in posts
Search in pages

Pre-requisites before flashing BLU Dash G:

  • Battery should be charged up to 70%
  • Make sure you have BLU Dash G's USB cord available
  • Download and install SP Flash tool in PC
  • Since, SP flash tool we need to install MediaTek USB drivers
  • Download BLU Dash G firmware file (Scatter file + files to be flashed)
  • Last but not the least, you need to take your device backup (for safety reasons)
  • Once you have all the things ready above, follow the rest of flashing tutorial

Steps to flashing BLU Dash G using SP flash tool

Follow the steps below to flash BLU Dash G with SP flash tool:

  • Install SP FLASH TOOL in PC - Step 1
    1
    Download & install spflashtool.exe:

    Download SP flash tool, spflashtool.exe

  • Download flash recovery image Step 2
    2
    Download flash recovery image:

    FLashing is not easy, it take time and patience. To flash BLU Dash G, make sure you have flash recovery image ready for your device model.

  • BLU Dash G flashing tutorial with SP Flash Tool - Step 3
    3
    Load scatter file:

    Click Scatter Loading (Load Scatter file of BLU Dash G).

  • 4
    Uncheck all boxes :

    Now, you should uncheck all boxes from SP flash tool

  • 5
    Load Recovery Image:

    Tick-box, Go to / click RECOVERY box from list and load recovery image of your BLU Dash G device (load image from the separate window -->open)

  • 6
    Recovery box must be CHECKED:

    Recovery box is checked before you connect your BLU Dash G, in recovery image location (uncheck all other boxes)

  • 7
    Turn off and connect BLU Dash G with PC:

    Turn off BLU Dash G and connect it with PC

  • 8
    Click Download button:

    After connecting your device with PC, just click download button on top

  • 9
    Step #9, click yes:

    If it ask click “yes”

  • 10
    Conguratulations:

    Congrats! You have successfully flashed your BLU Dash G device

Disclaimer: Please follow the flashing tutorials on your own risk.

Conclusion

If SP flash tool prompts green circle, you are done. BLU Dash G have been flashed using SP flash tool.

Leave a Reply

Your email address will not be published. Required fields are marked *