Allview P6 Quad Plus Flashing Tutorial with SP Flash Tool

Home » Allview » Allview P6 Quad Plus Flashing Tutorial with SP Flash Tool
Allview P6 Quad Plus Flashing Tutorial with SP Flash Tool

If you are trying to flash your Allview P6 Quad Plus device then I would like to suggest you to try using Smartphone flash tool (aka SP Flash Tool). SP flash tool is great flashing tool for Android. You can use this tool to flash almost any MTK (Mediatak IC) based smartphone. Try flashing any custom ROMs, stock ROMs on your Allview P6 Quad Plus Android smartphone.

SP flash tool is best firmware flashing tool available online whether it is custom ROM or stock ROM. Using SP Flash Tool, you can flash Allview P6 Quad Plus Android device (but make sure to check if it is based on Mediatek IC). Flash any custom or stock ROM over Allview P6 Quad Plus Android device. Also, do make sure that you have installed Allview P6 Quad Plus USB drivers properly on your PC before flashing any firmware file.

Find your Allview P6 Quad Plus USB drivers by using search below:

Generic selectors
Exact matches only
Search in title
Search in content
Search in posts
Search in pages

Pre-requisites before flashing Allview P6 Quad Plus:

  • Battery should be charged up to 70%
  • Make sure you have Allview P6 Quad Plus's USB cord available
  • Download and install SP Flash tool in PC
  • Since, SP flash tool we need to install MediaTek USB drivers
  • Download Allview P6 Quad Plus firmware file (Scatter file + files to be flashed)
  • Last but not the least, you need to take your device backup (for safety reasons)
  • Once you have all the things ready above, follow the rest of flashing tutorial

Steps to flashing Allview P6 Quad Plus using SP flash tool

Follow the steps below to flash Allview P6 Quad Plus with SP flash tool:

  • Install SP FLASH TOOL in PC - Step 1
    1
    Download & install spflashtool.exe:

    Download SP flash tool, spflashtool.exe

  • Download flash recovery image Step 2
    2
    Download flash recovery image:

    FLashing is not easy, it take time and patience. To flash Allview P6 Quad Plus, make sure you have flash recovery image ready for your device model.

  • Allview P6 Quad Plus flashing tutorial with SP Flash Tool - Step 3
    3
    Load scatter file:

    Click Scatter Loading (Load Scatter file of Allview P6 Quad Plus).

  • 4
    Uncheck all boxes :

    Now, you should uncheck all boxes from SP flash tool

  • 5
    Load Recovery Image:

    Tick-box, Go to / click RECOVERY box from list and load recovery image of your Allview P6 Quad Plus device (load image from the separate window -->open)

  • 6
    Recovery box must be CHECKED:

    Recovery box is checked before you connect your Allview P6 Quad Plus, in recovery image location (uncheck all other boxes)

  • 7
    Turn off and connect Allview P6 Quad Plus with PC:

    Turn off Allview P6 Quad Plus and connect it with PC

  • 8
    Click Download button:

    After connecting your device with PC, just click download button on top

  • 9
    Step #9, click yes:

    If it ask click “yes”

  • 10
    Conguratulations:

    Congrats! You have successfully flashed your Allview P6 Quad Plus device

Disclaimer: Please follow the flashing tutorials on your own risk.

Conclusion

If SP flash tool prompts green circle, you are done. Allview P6 Quad Plus have been flashed using SP flash tool.

Leave a Reply

Your email address will not be published. Required fields are marked *