Adcom ZOPO Color C Flashing Guide with SP Flash Tool

Home » Adcom » Adcom ZOPO Color C Flashing Guide with SP Flash Tool
Adcom ZOPO Color C Flashing Guide with SP Flash Tool

If you are trying to flash your Adcom ZOPO Color C device then I would like to suggest you to try using Smartphone flash tool (aka SP Flash Tool). SP flash tool is great flashing tool for Android. You can use this tool to flash almost any MTK (Mediatak IC) based smartphone. Try flashing any custom ROMs, stock ROMs on your Adcom ZOPO Color C Android smartphone.

SP flash tool is best firmware flashing tool available online whether it is custom ROM or stock ROM. Using SP Flash Tool, you can flash Adcom ZOPO Color C Android device (but make sure to check if it is based on Mediatek IC). Flash any custom or stock ROM over Adcom ZOPO Color C Android device. Also, do make sure that you have installed Adcom ZOPO Color C USB drivers properly on your PC before flashing any firmware file.

Find your Adcom ZOPO Color C USB drivers by using search below:

Generic selectors
Exact matches only
Search in title
Search in content
Search in posts
Search in pages

Pre-requisites before flashing Adcom ZOPO Color C:

  • Battery should be charged up to 70%
  • Make sure you have Adcom ZOPO Color C's USB cord available
  • Download and install SP Flash tool in PC
  • Since, SP flash tool we need to install MediaTek USB drivers
  • Download Adcom ZOPO Color C firmware file (Scatter file + files to be flashed)
  • Last but not the least, you need to take your device backup (for safety reasons)
  • Once you have all the things ready above, follow the rest of flashing tutorial

Steps to flashing Adcom ZOPO Color C using SP flash tool

Follow the steps below to flash Adcom ZOPO Color C with SP flash tool:

  • Install SP FLASH TOOL in PC - Step 1
    Download & install spflashtool.exe:

    Download SP flash tool, spflashtool.exe

  • Download flash recovery image Step 2
    Download flash recovery image:

    FLashing is not easy, it take time and patience. To flash Adcom ZOPO Color C, make sure you have flash recovery image ready for your device model.

  • Adcom ZOPO Color C flashing tutorial with SP Flash Tool - Step 3
    Load scatter file:

    Click Scatter Loading (Load Scatter file of Adcom ZOPO Color C).

  • 4
    Uncheck all boxes :

    Now, you should uncheck all boxes from SP flash tool

  • 5
    Load Recovery Image:

    Tick-box, Go to / click RECOVERY box from list and load recovery image of your Adcom ZOPO Color C device (load image from the separate window -->open)

  • 6
    Recovery box must be CHECKED:

    Recovery box is checked before you connect your Adcom ZOPO Color C, in recovery image location (uncheck all other boxes)

  • 7
    Turn off and connect Adcom ZOPO Color C with PC:

    Turn off Adcom ZOPO Color C and connect it with PC

  • 8
    Click Download button:

    After connecting your device with PC, just click download button on top

  • 9
    Step #9, click yes:

    If it ask click “yes”

  • 10

    Congrats! You have successfully flashed your Adcom ZOPO Color C device

Disclaimer: Please follow the flashing tutorials on your own risk.


If SP flash tool prompts green circle, you are done. Adcom ZOPO Color C have been flashed using SP flash tool.

Leave a Reply

Your email address will not be published. Required fields are marked *